把这段内容添加到start-gcode那里
- <div>G92 E0 ;Reset Extruder
- G1 Z2.0 F3000 ;Move Z Axis up
- G1 X20 Y5.1 Z0.28 F5000.0 ;Move to start position
- G1 X200.0 Y5.1 Z0.28 F1500.0 E15 ;Draw the first line
- G1 X200.0 Y5.4 Z0.28 F5000.0 ;Move to side a little
- G1 X20 Y5.4 Z0.28 F1500.0 E30 ;Draw the second line
- G1 Z0.4 F3000; Move Z Axis Up
- G1 X50 F1500; Wipe to the right
- G92 E0 ;Reset Extruder</div>
|
